Scrap Metal Removal in Dallas, TX
Copper pipe, aluminum siding, an old water heater, a garage full of mixed metal. We haul scrap across Dallas to certified recycling facilities, and we will tell you straight when hauling it yourself pays better.
Free Pickup, Paid Removal, or Haul It Yourself: The Honest Guide
Scrap metal is the one junk category where your junk might be worth money, so here is the honest breakdown nobody else gives you. If your load is mostly clean, high-value metal like copper or brass, it may qualify for a free pickup. If it is a small mixed load with more labor than metal value, paid removal is the practical option.
Every Metal We Take
Ferrous or non-ferrous, rusty or clean, we take it all. Common scrap pickups across Dallas include:
- Copper: pipe, tubing, and wire
- Brass: fixtures, fittings, and valves
- Aluminum: siding, gutters, cans, and window frames
- Steel and iron: beams, shelving, and machinery parts
- Stainless steel sinks and commercial kitchen pieces
- Appliances: water heaters, washers, dryers, stoves, and refrigerators
- Chain-link fencing and metal posts
- Rims, radiators, and auto parts
Mixed loads are fine. Pile the metal with whatever else needs to go and we will separate the recyclable metals when we load.
Selling Scrap in Texas: What the Law Requires
Texas regulates scrap metal sales, and it is worth knowing the basics before you drive a load to a yard yourself. Sellers are required to show valid ID, and regulated metals carry reporting and hold requirements at the buying yard. That is normal consumer protection against metal theft, not a hassle, but bring your ID or you will be turned away.
When we haul your scrap, your metal moves through compliant channels to certified recycling facilities. You get the convenience of a pickup without the yard paperwork, the sorting, or the wait in line at the scale.
Who We Serve Across Dallas
Scrap metal shows up in every trade, and we pick up for all of them. Homeowners clearing garages, sheds, and side yards. Mechanics and auto shops with rims, rotors, and parts piling up. Plumbers and HVAC techs with copper, brass, and old units from jobs. Contractors and remodelers with jobsite metal. Property managers clearing abandoned appliances and fencing from rentals.
Commercial customers can set up recurring pickups so scrap never accumulates. One request sets the rhythm, and your shop or jobsite stays clear.
Every pound of metal we haul goes to certified recycling facilities in the DFW area. Steel gets melted into new steel. Copper and aluminum get refined and reused. Even old appliances are broken down so the metals inside re-enter manufacturing.
Metal is one of the most recyclable materials on earth, which is why we are strict about keeping it out of the landfill. When you book a scrap pickup with us, the metal in your pile has a second life ahead of it.
How it works
Request your free estimate
Tell us what needs to go, where it is, and when you need it gone. Photos help clarify bulky or mixed loads.
We handle the lifting and hauling
On pickup day, the crew lifts, loads, and hauls everything away, working around stairs, gates, and tight access.
Your space is clear
We sweep up and confirm the job is done before we leave, so the space is ready for whatever comes next.
Get a quote based on the actual items, access and timing.
Request a free quoteKnow what belongs in the job.
Selling Scrap in Texas: What the Law Requires
Texas regulates scrap metal sales, and it is worth knowing the basics before you drive a load to a yard yourself. Sellers are required to show valid ID, and regulated metals carry reporting and hold requirements at the buying yard. That is normal consumer protection against metal theft, not a hassle, but bring your ID or you will be turned away.
When we haul your scrap, your metal moves through compliant channels to certified recycling facilities. You get the convenience of a pickup without the yard paperwork, the sorting, or the wait in line at the scale.
What Affects Your Free Quote
Scrap metal quotes work a little differently, because the metal itself has value. These are the factors:
- Type of metal. Copper and brass carry more value than steel and iron, which affects whether a pickup can be free.
- Amount and concentration. A dense load of clean metal is worth more than a scattered mixed pile.
- Mixed loads. Metal mixed with general junk takes sorting time, which factors into a paid removal quote.
- Access and volume. As with every job, stairs, distance to the truck, and total volume shape the labor side.
Send photos with your request. We will tell you plainly whether your load qualifies for free pickup or what the removal quote looks like.
A clear path for homes, properties and projects.
Who We Serve Across Dallas
Scrap metal shows up in every trade, and we pick up for all of them. Homeowners clearing garages, sheds, and side yards. Mechanics and auto shops with rims, rotors, and parts piling up. Plumbers and HVAC techs with copper, brass, and old units from jobs. Contractors and remodelers with jobsite metal. Property managers clearing abandoned appliances and fencing from rentals.
Commercial customers can set up recurring pickups so scrap never accumulates. One request sets the rhythm, and your shop or jobsite stays clear.
Dallas access changes from block to block.
We pick up scrap metal across Dallas, from Deep Ellum workshops to Garland, Irving, Mesquite, and the surrounding DFW communities.